# apsimx: An R package for APSIM Next Generation (and Classic)

#### Fernando Miguez

#### 2024-05-06

    ## Will only write file to a temporary directory for these Examples
    tmp.dir <- tempdir()

# Introduction

Are you a user of APSIM-X (“Next Generation”)? Are you a frequent user of R? Are you hoping for APSIM-X and R to interact with each other? Then the answer is the apsimx package, which allows you to inspect, edit, run and read files created by APSIM-X – .apsim(x) files. New .apsimx files are based on the JSON (JavaScript Object Notation https://www.json.org/) format and it is used to communicate information to the APSIM-X engine. By using the ‘jsonlite’ R package apsimx can read and write (‘inspect’ and ‘edit’) files in this format. APSIM ‘Classic’ used an XML format and this type is now fully supported (‘inspect’, ‘edit’, ‘run’ and ‘read’). For ‘inspect’ and ‘edit’ in the APSIM ‘Classic’ version I use the ‘xml2’ package. To run simulations the apsimx function (apsim for ‘Classic’) is available and results from the simulation can be imported as an R object with a dedicated function (read_apsimx ‘NG’ and read_apsim for ‘Classic’). If you need to write scripts (regardless of whether you use the apsimx package or not) the vignette ‘writing scripts’ might be useful. The package is currently being developed and available at: https://github.com/femiguez/apsimx. If you have any questions write to: femiguez at iastate.edu.

In part this package is inspired by previous work by Bryan Stanfill on the ‘apsimr’ package (previously available from CRAN and github: https://github.com/stanfill/apsimr). That package made it possible to not only run APSIM from R, but also to perform sensitivity analysis and model emulation using ‘GAMS’. However, that package has not been maintained in the last five years and it does not work for the new APSIM-X framework. Another useful R package used to be ‘APSIM’, but it has been removed from CRAN (as of 2020-10-19) but as with ‘apsimr’ it has not been updated and it has somewhat of a different functionality. The ‘APSIM’ package was especially useful for creating weather (‘.met’) files. The functionality in apsimx goes beyond that in the removed ‘APSIM’ package. There is also a package ‘APSIMBatch’, but it has limited functionality.

## Background information

To run the code in this vignette, you need to have APSIM ‘Next Generation’ installed. However, if you have not used APSIM it is recommended that you become familiar with it before hand.

See the following for details

APSIM

APSIM-X

Holzworth et al. (2018)

This package has been tested on (latest version):

Mac: ApsimX version (2024-02) 7382 (R 4.3.0)

Debian: ApsimX version (2024-02) 7382 (R 4.1.2)

Windows: ApsimX version (2024-02) 7382 and APSIM Classic 7.10-r4221 (R 4.3.3)

## Installing APSIM (Next Generation)

For most functions in this package you need to have a version of APSIM-X (or ‘Next Generation’) installed (or APSIM ‘Classic’). For Mac and Linux, for versions older than Sep 2021, first you need to install mono (https://www.mono-project.com/download/stable/) and then download and install APSIM (https://www.apsim.info/download-apsim/downloads/). NOTE: If you are using a version of APSIM Next Gen released after Sep 2021, you do not need to install mono. You will need the .NET Runtime 6.0 for Linux or Mac (https://dotnet.microsoft.com, -> download -> dotnet -> 6.0). The apsimx package will try to detect both mono and APSIM (Classic and Next Generation).

Mac: For Mac it is also assumed that APSIM has been moved to ‘Applications’.

Windows: In Windows the default install location is in ‘Program Files’ for APSIM (Next Generation) and Program Files (x86) for APSIM ‘Classic’.

Linux (Debian): It assumed that APSIM is in ‘/usr/local/lib/apsim/’.

If you have your own flavor of APSIM, then you need to set the path manually using the function ‘apsim_options’ for Classic and ‘apsimx_options’ for Next Generation.

## R functions for APSIM (Next Generation)

The main functions in the package are (for now):

- inspect_apsimx simple inspecting of an .apsimx file. (It does not replace the GUI.)
- edit_apsimx edit/modify an .apsimx file.
- apsimx run an .apsimx simulation.
- read_apsimx read files created by an .apsimx simulation run (.db files)
- read_apsimx_all read all files created by one or more .apsimx simulation runs in a directory (.db files)
- inspect_apsimx_replacement inspect a replacement component of an .apsimx file.
- apsimx_options set global options: path for executable, examples and warnings.

There are many other useful function described below.

## R functions for APSIM ‘Classic’ (7.x) - Only for Windows

The main functions relevant for ‘Classic’ are:

- inspect_apsim allows for inspection of .apsim file.
- edit_apsim edit an .apsim file.
- apsim runs an .apsim file.
- read_apsim reads files (.out and .sim) generated by apsim into a data frame.
- apsim_example runs (only a few) of the built-in examples.
- apsim_options set global options: path for executable, examples and warnings.
- edit_apsim_xml edit an XML file such as Maize.xml or Soil.xml

See also ‘optim’ vignette for optimization options and ‘sensitivity’ vignette for sensitivity analysis.

# Using ‘apsimx’

## Running a built-in example with ‘apsimx_example’

To get started you can run one of the examples distributed with APSIM-X. This function does the following: it detects where the APSIM examples are located, it runs the example indicated and it returns the ‘report’ as a data.frame. After that you can do the usual manipulations, including visualization.

    maize <- apsimx_example("Maize")

After we run this example we can treat it as a standard data frame in R.

    summary(maize)

    ##   CheckpointID  SimulationID     Zone           Clock.Today
    ##  Min.   :1     Min.   :1     Length:10          Length:10
    ##  1st Qu.:1     1st Qu.:1     Class :character   Class :character
    ##  Median :1     Median :1     Mode  :character   Mode  :character
    ##  Mean   :1     Mean   :1
    ##  3rd Qu.:1     3rd Qu.:1
    ##  Max.   :1     Max.   :1
    ##  Maize.Phenology.CurrentStageName Maize.AboveGround.Wt Maize.AboveGround.N
    ##  Length:10                        Min.   : 198.5       Min.   : 2.103
    ##  Class :character                 1st Qu.: 887.8       1st Qu.: 9.149
    ##  Mode  :character                 Median :1347.2       Median :13.543
    ##                                   Mean   :1261.5       Mean   :12.749
    ##                                   3rd Qu.:1620.2       3rd Qu.:17.056
    ##                                   Max.   :1995.9       Max.   :18.327
    ##  Maize.Grain.Wt   Maize.Grain.Size Maize.Grain.NumberFunction Maize.Grain.N
    ##  Min.   : 70.35   Min.   :0.2205   Min.   : 232.3             Min.   : 0.9447
    ##  1st Qu.:381.36   1st Qu.:0.2820   1st Qu.:1440.0             1st Qu.: 5.2682
    ##  Median :636.27   Median :0.2926   Median :2220.7             Median : 8.4116
    ##  Mean   :585.84   Mean   :0.2850   Mean   :2058.2             Mean   : 7.7509
    ##  3rd Qu.:836.26   3rd Qu.:0.2988   3rd Qu.:2880.1             3rd Qu.:11.0796
    ##  Max.   :885.18   Max.   :0.3028   Max.   :3058.4             Max.   :11.3600
    ##  Maize.Total.Wt        Date
    ##  Min.   : 221.6   Min.   :1991-05-28
    ##  1st Qu.: 984.6   1st Qu.:1993-06-15
    ##  Median :1493.8   Median :1995-09-24
    ##  Mean   :1379.6   Mean   :1995-10-01
    ##  3rd Qu.:1757.4   3rd Qu.:1997-12-12
    ##  Max.   :2152.1   Max.   :2000-04-04

    ## Simple data plotting
    ggplot(data = maize , aes(x = Date, y = Maize.AboveGround.Wt)) +
      geom_point()

## Inspecting a file with ‘inspect_apsimx’: Why?

Being able to inspect a file from within R is a functionality which was not considered in previous R packages. My first motivation for doing this was to be able to verify from within R that if I edited an APSIM(X) file, the editing worked as expected. The second use of ‘inspect’ is to be able to understand the structure of ‘apsim’ files better. A third useful aspect of ‘inspect’ is that it can be used to supply the path for a parameter that will be later edited. Another benefit of the inspect functions is that if you are running APSIM in a Linux cluster, you do not have access to the GUI, so these functions allow you to inspect your files in that environment. In addition, having this functionality within R allows to make these tasks repeatable. For complex inspections and manipulations of an .apsim(x) file the GUI is recommended. This package was originally designed to work with relatively simple .apsim(x) files, but functionality has evolved and it can handle more complex simulations.

## Inspecting and Editing the ‘Maize’ example

Here I’m using the ‘Maize’ example distributed with APSIM-X but stored in the package and the specific task is: we want to make sure that the intended component was edited as expected. Let’s look at the weather file used.

    extd.dir <- system.file("extdata", package = "apsimx")
    inspect_apsimx("Maize.apsimx", src.dir = extd.dir, node = "Weather")

    ## Met file: %root%\Examples\WeatherFiles\Dalby.met

Editing a file has the side effect of creating a new file with ‘-edited’ added to the name to avoid conflict or unintended consequences, but it is also possible to overwrite it. This follows the same style as in the ‘apsimr’ package. One difference is that it is possible to supply a different ‘edit.tag’. This code does not run an APSIM simulation, it only edits the file.

Let’s say we want to modify the values of ‘Organic Carbon’ in the soil in the ‘Maize.apsimx’ example. First we should inspect the current values.

    inspect_apsimx("Maize.apsimx", src.dir = extd.dir,
                   node = "Soil", soil.child = "Organic")

    ## Soil Type:  Clay
    ## Latitude:  -27.58184
    ## Longitude:  151.3202
    ## Soil children: Physical SoilWater Organic Chemical InitialWater InitialN CERESSoilTemperature Nutrient
    ##
    ##
    ## |parm       |value |
    ## |:----------|:-----|
    ## |FOMCNRatio |40    |
    ##
    ##
    ## |Depth   |Thickness |Carbon |SoilCNRatio |FBiom |FInert |FOM              |
    ## |:-------|:---------|:------|:-----------|:-----|:------|:----------------|
    ## |0-15    |150       |1.2    |12          |0.04  |0.4    |347.129032312756 |
    ## |15-30   |150       |0.96   |12          |0.02  |0.6    |270.344362191994 |
    ## |30-60   |300       |0.6    |12          |0.02  |0.8    |163.972144349901 |
    ## |60-90   |300       |0.3    |12          |0.02  |1      |99.4541328870406 |
    ## |90-120  |300       |0.18   |12          |0.01  |1      |60.3219808311247 |
    ## |120-150 |300       |0.12   |12          |0.01  |1      |36.5871308286749 |
    ## |150-180 |300       |0.12   |12          |0.01  |1      |22.1912165985086 |

The function ‘inspect_apsimx’, in this example, displays various information about the organic matter in the soil. (See the help page - ?inspect_apsimx - for more options). In the next step, we ‘edit’ the values.

    ocs <- c(1.5, 1.4, 1.3, 1.2, 1.1, 1.0, 0.9)
    edit_apsimx("Maize.apsimx",
                src.dir = extd.dir,
                wrt.dir = ".",
                node = "Soil",
                soil.child = "Organic",
                parm = "Carbon", value = ocs)

    ## Edited (node):  Soil
    ## Edited (child):  Organic
    ## Edited parameters:  Carbon
    ## New values:  1.5 1.4 1.3 1.2 1.1 1 0.9
    ## Created:  ./Maize-edited.apsimx

Let’s make sure that we have changed the values successfully.

    inspect_apsimx("Maize-edited.apsimx", src.dir = ".",
                   node = "Soil", soil.child = "Organic")

    ## Soil Type:  Clay
    ## Latitude:  -27.58184
    ## Longitude:  151.3202
    ## Soil children: Physical SoilWater Organic Chemical InitialWater InitialN CERESSoilTemperature Nutrient
    ##
    ##
    ## |parm       |value |
    ## |:----------|:-----|
    ## |FOMCNRatio |40    |
    ##
    ##
    ## |Depth   |Thickness |Carbon |SoilCNRatio |FBiom |FInert |FOM              |
    ## |:-------|:---------|:------|:-----------|:-----|:------|:----------------|
    ## |0-15    |150       |1.5    |12          |0.04  |0.4    |347.129032312756 |
    ## |15-30   |150       |1.4    |12          |0.02  |0.6    |270.344362191994 |
    ## |30-60   |300       |1.3    |12          |0.02  |0.8    |163.972144349901 |
    ## |60-90   |300       |1.2    |12          |0.02  |1      |99.4541328870406 |
    ## |90-120  |300       |1.1    |12          |0.01  |1      |60.3219808311247 |
    ## |120-150 |300       |1      |12          |0.01  |1      |36.5871308286749 |
    ## |150-180 |300       |0.9    |12          |0.01  |1      |22.1912165985086 |

There is another function that might be useful inspect_apsimx_json which can be more flexible and a variation of grep grep_json_list.

# Proposed workflow

It is recommended that you start by creating an .apsim(x) file using the GUI. In following steps the goal could be, for example, to either perform sensitivity or uncertainty analysis using R. The functions included in this package are aimed at simplifying the process of running a simulation, changing the value of a variable/parameter and running the model again iteratively. Writing complex scripts requires a high level knowledge of both APSIM and R, but it is made possible with these tools. This is the proposed workflow:

1. Create a simulation using the APSIM GUI
2. Identify variables/parameters that you want to modify (they need to be exposed in the .apsimx (JSON) or .apsim (XML) file)
3. Edit the file using ‘edit_apsim(x)’
4. Run the simulation using ‘apsim(x)’
5. Repeat steps 3 and 4 as needed
6. Read in and/or manipulate the results, possibly using ‘read_apsim(x)’
7. Perform visual and statistical analysis

Another proposed more advanced workflow would involve calibrating or optimizing variables given observed data. This is considered in more detail below.

## Wheat Example (APSIM-X)

The ‘Wheat’ example is distributed with the ‘apsimx’ package.

    sim <- apsimx("Wheat.apsimx", src.dir = extd.dir, value = "report")

If you have APSIM-X installed you can also run it in this way.

    ex.dir <- auto_detect_apsimx_examples()
    ## Copy 'Wheat' file to a temporary directory
    ## (or change as needed)
    tmp.dir2 <- tempdir()
    file.copy(paste0(ex.dir, "/", "Wheat.apsimx"), tmp.dir2)
    sim <- apsimx("Wheat.apsimx", src.dir = tmp.dir2, value = "report")

    ## Calcualte summary statistics on all variables
    summary(sim)

    ##   CheckpointID  SimulationID     Zone           Clock.Today
    ##  Min.   :1     Min.   :1     Length:79          Length:79
    ##  1st Qu.:1     1st Qu.:1     Class :character   Class :character
    ##  Median :1     Median :1     Mode  :character   Mode  :character
    ##  Mean   :1     Mean   :1
    ##  3rd Qu.:1     3rd Qu.:1
    ##  Max.   :1     Max.   :1
    ##  Wheat.Phenology.Zadok.Stage Wheat.Phenology.CurrentStageName
    ##  Min.   :0                   Length:79
    ##  1st Qu.:0                   Class :character
    ##  Median :0                   Mode  :character
    ##  Mean   :0
    ##  3rd Qu.:0
    ##  Max.   :0
    ##  Wheat.AboveGround.Wt Wheat.AboveGround.N     Yield        Wheat.Grain.Protein
    ##  Min.   :  64.59      Min.   : 2.619      Min.   : 251.3   Min.   :10.78
    ##  1st Qu.: 766.44      1st Qu.:22.448      1st Qu.:3155.3   1st Qu.:15.12
    ##  Median :1061.98      Median :26.816      Median :4050.3   Median :15.15
    ##  Mean   :1029.24      Mean   :25.734      Mean   :4126.6   Mean   :15.08
    ##  3rd Qu.:1355.02      3rd Qu.:30.893      3rd Qu.:5347.4   3rd Qu.:15.20
    ##  Max.   :1654.14      Max.   :35.665      Max.   :7204.5   Max.   :15.35
    ##  Wheat.Grain.Size  Wheat.Grain.Number Wheat.Grain.Total.Wt Wheat.Grain.Total.N
    ##  Min.   :0.01992   Min.   : 1112      Min.   : 25.13       Min.   : 0.6662
    ##  1st Qu.:0.02196   1st Qu.:13475      1st Qu.:315.53       1st Qu.: 8.3994
    ##  Median :0.02334   Median :17118      Median :405.03       Median :10.6031
    ##  Mean   :0.02492   Mean   :16240      Mean   :412.66       Mean   :10.9070
    ##  3rd Qu.:0.02646   3rd Qu.:19980      3rd Qu.:534.74       3rd Qu.:14.1672
    ##  Max.   :0.04120   Max.   :24042      Max.   :720.45       Max.   :19.2557
    ##  Wheat.Total.Wt         Date
    ##  Min.   :  79.04   Min.   :1900-11-14
    ##  1st Qu.: 889.73   1st Qu.:1927-05-14
    ##  Median :1236.50   Median :1953-11-01
    ##  Mean   :1193.27   Mean   :1952-08-20
    ##  3rd Qu.:1563.53   3rd Qu.:1978-05-23
    ##  Max.   :1922.30   Max.   :2000-11-18

    ## Plot data
    ggplot(data = sim, aes(x = Date, y = Yield)) + geom_point()

    ## Inspect the Wheat .apsimx file
    inspect_apsimx("Wheat.apsimx", src.dir = extd.dir, node = "Crop")

    ##
    ##
    ## |parm         |value  |
    ## |:------------|:------|
    ## |StartDate    |1-may  |
    ## |EndDate      |10-jul |
    ## |MinESW       |100    |
    ## |MinRain      |25     |
    ## |RainDays     |7      |
    ## |CultivarName |Hartog |
    ## |SowingDepth  |30     |
    ## |RowSpacing   |250    |
    ## |Population   |120    |

    ## This only displays the available 'Manager' components
    inspect_apsimx("Wheat.apsimx", src.dir = extd.dir, node = "Manager")

    ## Management Scripts:  SowingFertiliser Harvest SowingRule1

    ## Looking more in-depth into 'SowingRule1'
    inspect_apsimx("Wheat.apsimx", src.dir = extd.dir,
                   node = "Manager", parm = list("SowingRule1", NA))

    ## Management Scripts:  SowingFertiliser Harvest SowingRule1
    ##
    ## Name:  SowingRule1
    ##
    ##
    ## |parm         |value  |
    ## |:------------|:------|
    ## |StartDate    |1-may  |
    ## |EndDate      |10-jul |
    ## |MinESW       |100    |
    ## |MinRain      |25     |
    ## |RainDays     |7      |
    ## |CultivarName |Hartog |
    ## |SowingDepth  |30     |
    ## |RowSpacing   |250    |
    ## |Population   |120    |

If you only want to display the Wheat cultivar choose the sixth element in that table.

    inspect_apsimx("Wheat.apsimx", src.dir = extd.dir,
                   node = "Manager", parm = list("SowingRule1", 6))

    ## Management Scripts:  SowingFertiliser Harvest SowingRule1
    ##
    ## Name:  SowingRule1
    ## Key: CultivarName
    ##
    ##
    ## |parm         |value  |
    ## |:------------|:------|
    ## |CultivarName |Hartog |

    ## We can print and store the path to this parameter
    pp <- inspect_apsimx("Wheat.apsimx", src.dir = extd.dir,
                   node = "Manager", parm = list("SowingRule1", 6),
                   print.path = TRUE)

    ## Management Scripts:  SowingFertiliser Harvest SowingRule1
    ##
    ## Name:  SowingRule1
    ## Key: CultivarName
    ##
    ##
    ## |parm         |value  |
    ## |:------------|:------|
    ## |CultivarName |Hartog |
    ##
    ## Parm path: .Simulations.Simulation.Field.SowingRule1.CultivarName

## Millet example (APSIM ‘Classic’)

One of the difficulties with working with APSIM(X) in scripting efforts is that the names of the parameters that we might want to edit can be buried deep in the .apsim(x) file and that there might be multiple instances of those parameters. To overcome this (to some extent) the ‘inspect’ functions can provide the path to the parameter to edit. For example,

    inspect_apsim("Millet.apsim", src.dir = extd.dir, node  = "Manager")

    ## Crop Type:  millet
    ## Management Scripts:
    ## Sow on a fixed date
    ## Harvesting rule
    ## Tiller Aggregation

We can see that we have ‘Sow on a fixed date’ as one of the options. Let’s say that we want to edit the planting density

    inspect_apsim("Millet.apsim", src.dir = extd.dir, node  = "Manager",
                  parm = list("Sow on a fixed date", NA))

    ## Crop Type:  millet
    ## Management Scripts:
    ## Sow on a fixed date
    ## Harvesting rule
    ## Tiller Aggregation
    ##
    ##
    ## Selected manager:  Sow on a fixed date
    ##
    ##
    ## |parm                                |value   |
    ## |:-----------------------------------|:-------|
    ## |Sowing criteria                     |        |
    ## |Enter sowing date (dd-mmm) :        |1-dec   |
    ## |Sowing parameters                   |        |
    ## |Enter name of crop to sow :         |millet  |
    ## |Enter sowing density  (plants/m2) : |7.5     |
    ## |Enter sowing depth  (mm) :          |30      |
    ## |Enter cultivar :                    |wrajpop |

Planting density is the fifth element in that table. We can obtain the full path by using the ‘print.path’ option. It makes sense to use this option once you have found the parameter you are looking for.

    inspect_apsim("Millet.apsim", src.dir = extd.dir, node  = "Manager",
                  parm = list("Sow on a fixed date",5), print.path = TRUE)

    ## Crop Type:  millet
    ## Management Scripts:
    ## Sow on a fixed date
    ## Harvesting rule
    ## Tiller Aggregation
    ##
    ##
    ## Selected manager:  Sow on a fixed date
    ##
    ##
    ## |   |parm                                |value |
    ## |:--|:-----------------------------------|:-----|
    ## |5  |Enter sowing density  (plants/m2) : |7.5   |
    ## Parm path: /folder/simulation/area/folder/manager[1]/ui/density

    ## Or store it in an object for later editing
    pp <- inspect_apsim("Millet.apsim", src.dir = extd.dir, node = "Manager",
                  parm = list("Sow on a fixed date", 5), print.path = TRUE)

    ## Crop Type:  millet
    ## Management Scripts:
    ## Sow on a fixed date
    ## Harvesting rule
    ## Tiller Aggregation
    ##
    ##
    ## Selected manager:  Sow on a fixed date
    ##
    ##
    ## |   |parm                                |value |
    ## |:--|:-----------------------------------|:-----|
    ## |5  |Enter sowing density  (plants/m2) : |7.5   |
    ## Parm path: /folder/simulation/area/folder/manager[1]/ui/density

Once we have identified the parameter we want to edit, we can do so by using the ‘edit_apsim’ function. When using the ‘parm.path’ argument, node should be “Other”.

    edit_apsim("Millet.apsim", src.dir = extd.dir, wrt.dir = tmp.dir,
               node = "Other", parm.path = pp, value = 8,
               edit.tag = "-pp")

    ## Edited /folder/simulation/area/folder/manager[1]/ui/density
    ## Edited parameter
    ## New values  8
    ## Created  /var/folders/6j/xksd1tld70q91h73d5s0ln7c0000gn/T//Rtmp3Yt2W9/Millet-pp.apsim

Verify that it was edited correctly.

    inspect_apsim("Millet-pp.apsim", src.dir = tmp.dir,
                  node = "Manager",
                  parm = list("Sow on a fixed date", NA))

    ## Crop Type:  millet
    ## Management Scripts:
    ## Sow on a fixed date
    ## Harvesting rule
    ## Tiller Aggregation
    ##
    ##
    ## Selected manager:  Sow on a fixed date
    ##
    ##
    ## |parm                                |value   |
    ## |:-----------------------------------|:-------|
    ## |Sowing criteria                     |        |
    ## |Enter sowing date (dd-mmm) :        |1-dec   |
    ## |Sowing parameters                   |        |
    ## |Enter name of crop to sow :         |millet  |
    ## |Enter sowing density  (plants/m2) : |8       |
    ## |Enter sowing depth  (mm) :          |30      |
    ## |Enter cultivar :                    |wrajpop |

    ## [1] TRUE

# Advanced Examples

## Inspecting a ‘Replacement’ component

Many additional options in an APSIM-X simulation can be realized through the use of ‘Replacements’. For this, there is a function that allows inspection. In this case, it is important to know the structure of the ‘replacement’ and explore the available components. For example, if we want to display the xy pair for the thermal time in the phenology component of the ‘Maize’ replacement we might go through the following steps:

State the node (“Maize”) and display available components:

    inspect_apsimx_replacement("MaizeSoybean.apsimx", src.dir = extd.dir,
                               node = "Maize", display.available = TRUE)

    ## Replacements:  Maize Soybean
    ## node: Maize
    ## Level: node
    ## list Name: Maize
    ## list length: 11
    ## list names: $type PlantType IsAlive IsEnding DaysAfterEnding ResourceName Name Children IncludeInDocumentation Enabled ReadOnly
    ## Children: Yes
    ## Children length: 21
    ## Children Names: Arbitrator Phenology Structure Grain Root Leaf Husk Rachis Stem AboveGround BelowGround Total TotalLive TotalDead EarLive AboveGroundLive AboveGroundDead Future Development Needs CultivarFolder Spike MortalityRate
    ## missing node.child

Choose ‘Phenology’ as a ‘child’ of ‘Maize’:

    inspect_apsimx_replacement("MaizeSoybean.apsimx", src.dir = extd.dir,
                               node = "Maize", node.child = "Phenology",
                               display.available = TRUE)

    ## Replacements:  Maize Soybean
    ## node: Maize
    ## Level: node
    ## list Name: Maize
    ## list length: 11
    ## list names: $type PlantType IsAlive IsEnding DaysAfterEnding ResourceName Name Children IncludeInDocumentation Enabled ReadOnly
    ## Children: Yes
    ## Children length: 21
    ## Children Names: Arbitrator Phenology Structure Grain Root Leaf Husk Rachis Stem AboveGround BelowGround Total TotalLive TotalDead EarLive AboveGroundLive AboveGroundDead Future Development Needs CultivarFolder Spike MortalityRate
    ## node child: Phenology
    ## list Name: Phenology
    ## list length: 6
    ## list names: $type Name Children IncludeInDocumentation Enabled ReadOnly
    ## Children: Yes
    ## Children length: 16
    ## Children Names: ThermalTime Germinating Emerging Juvenile Photosensitive LeafAppearance FlagLeafToFlowering FloweringToGrainFilling GrainFilling Maturing MaturityToHarvestRipe ReadyForHarvesting Photoperiod FloweringDAS MaturityDAS BBCH
    ## node subchild:
    ## missing node.subchild

Choose ‘ThermalTime’ as a ‘sub.child’ of ‘Phenology’:

    inspect_apsimx_replacement("MaizeSoybean.apsimx", src.dir = extd.dir,
                               node = "Maize", node.child = "Phenology",
                               node.subchild = "ThermalTime",
                               display.available = TRUE)

    ## Replacements:  Maize Soybean
    ## node: Maize
    ## Level: node
    ## list Name: Maize
    ## list length: 11
    ## list names: $type PlantType IsAlive IsEnding DaysAfterEnding ResourceName Name Children IncludeInDocumentation Enabled ReadOnly
    ## Children: Yes
    ## Children length: 21
    ## Children Names: Arbitrator Phenology Structure Grain Root Leaf Husk Rachis Stem AboveGround BelowGround Total TotalLive TotalDead EarLive AboveGroundLive AboveGroundDead Future Development Needs CultivarFolder Spike MortalityRate
    ## node child: Phenology
    ## list Name: Phenology
    ## list length: 6
    ## list names: $type Name Children IncludeInDocumentation Enabled ReadOnly
    ## Children: Yes
    ## Children length: 16
    ## Children Names: ThermalTime Germinating Emerging Juvenile Photosensitive LeafAppearance FlagLeafToFlowering FloweringToGrainFilling GrainFilling Maturing MaturityToHarvestRipe ReadyForHarvesting Photoperiod FloweringDAS MaturityDAS BBCH
    ## node subchild: ThermalTime
    ## Subchild Name:  ThermalTime
    ## list Name: ThermalTime
    ## list length: 6
    ## list names: $type Name Children IncludeInDocumentation Enabled ReadOnly
    ## Children: Yes
    ## Children length: 1
    ## Children Names: BaseThermalTime
    ## missing node.subsubchild

Now we need to pick from within ‘ThermalTime’. There is a component named “BaseThermalTime”.

    inspect_apsimx_replacement("MaizeSoybean.apsimx", src.dir = extd.dir,
                               node = "Maize", node.child = "Phenology",
                               node.subchild = "ThermalTime",
                               node.subsubchild = "BaseThermalTime",
                               display.available = TRUE)

    ## Replacements:  Maize Soybean
    ## node: Maize
    ## Level: node
    ## list Name: Maize
    ## list length: 11
    ## list names: $type PlantType IsAlive IsEnding DaysAfterEnding ResourceName Name Children IncludeInDocumentation Enabled ReadOnly
    ## Children: Yes
    ## Children length: 21
    ## Children Names: Arbitrator Phenology Structure Grain Root Leaf Husk Rachis Stem AboveGround BelowGround Total TotalLive TotalDead EarLive AboveGroundLive AboveGroundDead Future Development Needs CultivarFolder Spike MortalityRate
    ## node child: Phenology
    ## list Name: Phenology
    ## list length: 6
    ## list names: $type Name Children IncludeInDocumentation Enabled ReadOnly
    ## Children: Yes
    ## Children length: 16
    ## Children Names: ThermalTime Germinating Emerging Juvenile Photosensitive LeafAppearance FlagLeafToFlowering FloweringToGrainFilling GrainFilling Maturing MaturityToHarvestRipe ReadyForHarvesting Photoperiod FloweringDAS MaturityDAS BBCH
    ## node subchild: ThermalTime
    ## Subchild Name:  ThermalTime
    ## list Name: ThermalTime
    ## list length: 6
    ## list names: $type Name Children IncludeInDocumentation Enabled ReadOnly
    ## Children: Yes
    ## Children length: 1
    ## Children Names: BaseThermalTime
    ## Name sub-sub-child:  BaseThermalTime
    ## Available node children (unpack_node):
    ## $type : Models.Functions.XYPairs, Models
    ## X : 0 18 26 34 44
    ## Y : 0 10 18 26 0
    ## Name : Response
    ## Children :
    ## IncludeInDocumentation : TRUE
    ## Enabled : TRUE
    ## ReadOnly : FALSE
    ##
    ## $type : Models.Functions.ThreeHourSin, Models
    ## TempRangeFactors :
    ## Name : InterpolationMethod
    ## Children :
    ## IncludeInDocumentation : TRUE
    ## Enabled : TRUE
    ## ReadOnly : FALSE
    ##
    ## missing node.sub3child

‘BaseThermalTime’ is the only child inside ‘ThermalTime’, but within ‘BaseThermalTime’ there are two Children: ‘Response’ and ‘InterpolationMethod’. There is not much to edit for ‘InterpolationMethod’, so we choose ‘Response’.

    inspect_apsimx_replacement("MaizeSoybean.apsimx", src.dir = extd.dir,
                               node = "Maize", node.child = "Phenology",
                               node.subchild = "ThermalTime",
                               node.subsubchild = "BaseThermalTime",
                               node.sub3child = "Response")

    ## Replacements:  Maize Soybean
    ## node: Maize
    ## node child: Phenology
    ## node subchild: ThermalTime
    ## Subchild Name:  ThermalTime
    ## Name sub-sub-child:  BaseThermalTime
    ## Name sub-sub-sub-child:  Response
    ## $type : Models.Functions.XYPairs, Models
    ## X : 0 18 26 34 44
    ## Y : 0 10 18 26 0
    ## Name : Response
    ## Children :
    ## IncludeInDocumentation : TRUE
    ## Enabled : TRUE
    ## ReadOnly : FALSE

Choose the ‘Y’ parameter within ‘Response’.

    inspect_apsimx_replacement("MaizeSoybean.apsimx", src.dir = extd.dir,
                               node = "Maize", node.child = "Phenology",
                               node.subchild = "ThermalTime",
                               node.subsubchild = "BaseThermalTime",
                               node.sub3child = "Response",
                               parm = "Y")

    ## Replacements:  Maize Soybean
    ## node: Maize
    ## node child: Phenology
    ## node subchild: ThermalTime
    ## Subchild Name:  ThermalTime
    ## Name sub-sub-child:  BaseThermalTime
    ## Name sub-sub-sub-child:  Response
    ## Y : 0 10 18 26 0

The function shows the available replacements (“Maize” and “Soybean”), the ‘CropType’ if available, the subchild name and the ‘Y’ vector in this example. If parm is not specified all elements will be displayed.

Let’s say we want to inspect details of soybean cultivars in the same file:

    inspect_apsimx_replacement("MaizeSoybean.apsimx", src.dir = extd.dir,
                               node = "Soybean", display.available = TRUE)

    ## Replacements:  Maize Soybean
    ## node: Soybean
    ## Level: node
    ## list Name: Soybean
    ## list length: 11
    ## list names: $type PlantType IsAlive IsEnding DaysAfterEnding ResourceName Name Children IncludeInDocumentation Enabled ReadOnly
    ## Children: Yes
    ## Children length: 17
    ## Children Names: Arbitrator Phenology Leaf Grain Root Nodule Shell Stem AboveGround BelowGround AboveGroundLive Total TotalLive TotalDead Pod MortalityRate Cultivars
    ## missing node.child

The cultivars are at the node.child level.

    inspect_apsimx_replacement("MaizeSoybean.apsimx",
                               src.dir = extd.dir,
                               node = "Soybean",
                               node.child = "Cultivars",
                               node.subchild = "USA",
                               node.subsubchild = "PioneerP22T61_MG22",
                               display.available = FALSE)

    ## Replacements:  Maize Soybean
    ## node: Soybean
    ## node child: Cultivars
    ## node subchild: USA
    ## Subchild Name:  USA
    ## Name sub-sub-child:  PioneerP22T61_MG22
    ## $type : Models.PMF.Cultivar, Models
    ##  : [Phenology].Vegetative.Target.FixedValue = 328
    ##  : [Phenology].EarlyFlowering.Target.FixedValue = 106
    ##  : [Phenology].EarlyGrainFilling.Target.FractionofGrainfilling.FixedValue = 0.3
    ##  : [Phenology].LateGrainFilling.Target.EntireGrainfillPeriod.FixedValue = 499
    ##  : [Phenology].VegetativePhotoperiodModifier.XYPairs.X = 13.59, 17.6
    ##  : [Phenology].ReproductivePhotoperiodModifier.XYPairs.X = 13.59, 17.6
    ## Command
    ## Name : PioneerP22T61_MG22
    ## IncludeInDocumentation : TRUE
    ## Enabled : TRUE
    ## ReadOnly : FALSE
    ## no node sub-sub-sub-children available or parm is not null

The function inspect_apsimx_replacement can also be used to inspect more complex file structures such as the ‘Factorial’ example distributed with APSIM-X. See ‘?inspect_apsimx_replacement’.

## Editing a ‘Replacement’

After using the ‘inspect’ version of the file, editing should be much more straight forward.

    edit_apsimx_replacement("MaizeSoybean.apsimx",
                            src.dir = extd.dir, wrt.dir = tmp.dir,
                            node = "Maize", node.child = "Phenology",
                            node.subchild = "ThermalTime",
                            node.subsubchild = "BaseThermalTime",
                            node.sub3child = "Response",
                            parm = "Y", value = c(0, 12, 20, 28, 0))

    ## Replacements:  Maize Soybean
    ## Available node children:  Arbitrator Phenology Structure Grain Root Leaf Husk Rachis Stem AboveGround BelowGround Total TotalLive TotalDead EarLive AboveGroundLive AboveGroundDead Future Development Needs CultivarFolder Spike MortalityRate
    ## Subchild Name:  ThermalTime
    ## Subsubchild Name:  BaseThermalTime
    ## Sub-sub-subchild Name:  Response
    ## Edited (node):  Maize
    ## Edited (node.child):  Phenology
    ## Edited (node.subchild):  ThermalTime
    ## Edited (node.subsubchild):  BaseThermalTime
    ## Edited (node.sub3child):  Response
    ## Edit (level):  6
    ## Edited parameter:  Y
    ## New values:  0 12 20 28 0
    ## Created:  /var/folders/6j/xksd1tld70q91h73d5s0ln7c0000gn/T//Rtmp3Yt2W9/MaizeSoybean-edited.apsimx

Let’s inspect the edited file

    inspect_apsimx_replacement("MaizeSoybean-edited.apsimx",
                               src.dir = tmp.dir,
                               node = "Maize",
                               node.child = "Phenology",
                               node.subchild = "ThermalTime",
                               node.subsubchild = "BaseThermalTime",
                               node.sub3child = "Response",
                               parm = "Y")

    ## Replacements:  Maize Soybean
    ## node: Maize
    ## node child: Phenology
    ## node subchild: ThermalTime
    ## Subchild Name:  ThermalTime
    ## Name sub-sub-child:  BaseThermalTime
    ## Name sub-sub-sub-child:  Response
    ## Y : 0 12 20 28 0

## Inspecting and editing a Factorial

The complexity of APSIM-X files can be mind-boggling and it makes it difficult to write robust functions across all tasks that APSIM is able to accomplish. I wrote the ‘inspect_apsimx_replacement’ and ‘edit_apsimx_replacement’ specifically to edit replacements but these functions have much more flexibility than ‘inspect_apsimx’ and ‘edit_apsimx’. The function ‘apsimx_example’ is limited in the number of examples that it is allowed to run, but this does not mean that you cannot run the other examples which are distributed with APSIM-X. Let’s take the ‘Factorial’ example:

If we want to inspect and edit this file, we need the ‘inspect_apsimx_replacement’ function.

    ## There are multiple 'Experiments' so we need to pick one
    inspect_apsimx_replacement("Factorial", src.dir = extd.dir,
                               root = list("Experiment", NA))
    ##These positions matched  Experiment   1 2 3 4 5
    ##Error in inspect_apsimx_replacement("Factorial", src.dir = ex.dir, root = ##list("Experiment", : Multiple root nodes found. Please provide a position

    ## There are multiple 'Experiments' so we need to pick one
    inspect_apsimx_replacement("Factorial", src.dir = extd.dir,
                               root = list("Experiment", 1))

    ## Warning in inspect_apsimx_replacement("Factorial", src.dir = extd.dir, root =
    ## list("Experiment", : Node does not appear to be a 'Replacements' node

    ## Replacements:  Factors Base
    ## Please provide a node

    ## We need to provide a node
    inspect_apsimx_replacement("Factorial", src.dir = extd.dir,
                               root = list("Experiment", 1),
                               node = "Base", display.available = TRUE)

    ## Warning in inspect_apsimx_replacement("Factorial", src.dir = extd.dir, root =
    ## list("Experiment", : Node does not appear to be a 'Replacements' node

    ## Replacements:  Factors Base
    ## node: Base
    ## Level: node
    ## list Name: Base
    ## list length: 7
    ## list names: $type Descriptors Name Children IncludeInDocumentation Enabled ReadOnly
    ## Children: Yes
    ## Children length: 4
    ## Children Names: Weather Clock Summary Field
    ## missing node.child

    ## We need to provide a node child
    inspect_apsimx_replacement("Factorial", src.dir = extd.dir,
                               root = list("Experiment", 1),
                               node = "Base", node.child = "Clock",
                               display.available = TRUE)

    ## Warning in inspect_apsimx_replacement("Factorial", src.dir = extd.dir, root =
    ## list("Experiment", : Node does not appear to be a 'Replacements' node

    ## Replacements:  Factors Base
    ## node: Base
    ## Level: node
    ## list Name: Base
    ## list length: 7
    ## list names: $type Descriptors Name Children IncludeInDocumentation Enabled ReadOnly
    ## Children: Yes
    ## Children length: 4
    ## Children Names: Weather Clock Summary Field
    ## node child: Clock
    ## Available node children (unpack_node):  $type StartDate EndDate Name Children IncludeInDocumentation Enabled ReadOnly
    ## $type : Models.Clock, Models
    ## StartDate : 2003-10-20T00:00:00
    ## EndDate : 2004-05-23T00:00:00
    ## Name : Clock
    ## IncludeInDocumentation : TRUE
    ## Enabled : TRUE
    ## ReadOnly : FALSE
    ## no node sub-children available or parm not equal to null

Here we stop at this level but it is possible to dig deeper using ‘node.subchild’ and ‘node.subsubchild’. It is not possible at this point to dig deeper than ‘node.sub5child’ in the hierarchy level.

The inspect_apsimx function can also handle factorials.

    inspect_apsimx("Factorial.apsimx", src.dir = extd.dir)
    ## Simulation structure:
    ## list Name: Simulations
    # list length: 8
    # list names: $type ExplorerWidth Version Name Children IncludeInDocumentation Enabled ReadOnly
    # Children: Yes
    # Children length: 6
    # Children Names: Experiment RangeExperiment OperationsExpt Compound ManagerExpt DataStore
    # Error in inspect_apsimx("Factorial", src.dir = ex.dir) :
    #   more than one simulation found and no root node label has been specified
    #  select one of the children names above

We need to pick one out of the possible factorials. If you check this file with the APSIM GUI, you’ll see that within ‘RangeExperiment’ there is ‘Factors’ and ‘Base2’, but the core simulation is within ‘Base2’. The ‘root’ argument provides the specific factorial and the node ‘Base2’ within that factorial.

    inspect_apsimx("Factorial.apsimx", src.dir = extd.dir,
                   root = c("RangeExperiment", "Base2"),
                   node = "Weather")

    ## Met file: WeatherFiles\lincoln.met

Following this structure, if we want to edit the path to the weather file we can use the following example.

    edit_apsimx("Factorial.apsimx",
                src.dir = extd.dir, wrt.dir = tmp.dir,
                root = c("RangeExperiment", "Base2"),
                node = "Weather",
                value = "Ames.met")

    ## Edited (node):  Weather
    ## Edited (child):  none
    ## Edited parameters:
    ## New values:  Ames.met
    ## Created:  /var/folders/6j/xksd1tld70q91h73d5s0ln7c0000gn/T//Rtmp3Yt2W9/Factorial-edited.apsimx

I won’t be running the ‘Factorial’ example here, but if you are interested this is done in the folder ‘tests’ in the pacakge source.

# APSIM Inputs: Weather and Soil

## Obtaining weather data

One of the easiest ways of generating weather data (“.met” files) is by using the ‘nasapower’ (https://github.com/ropensci/nasapower) or ‘GSODR’ (https://github.com/ropensci/GSODR) packages. For the US, some options are ‘daymetr’ (https://github.com/bluegreen-labs/daymetr) or through the Iowa Environmental Mesonet (https://mesonet.agron.iastate.edu/). In addition, this package provides the following utilities:

- read_apsim_met: read an APSIM met file into R with S3 class ‘met’.
- write_apsim_met: write an APSIM met file from an object of class ‘met’.
- check_apsim_met: check for reasonable values for met variables.
- impute_apsim_met: impute missing values using linear interpolation, splines or the mean.
- napad_apsim_met: Fill in date gaps with NAs in a ‘met’ object. Useful for imputation.
- compare_apsim_met: utility for quick comparison of ‘met’ objects. There is also a plot method.
- get_power_apsim_met: (requires the ‘nasapower’ package). Fetch data and create a ‘met’ R object and (optionally) write a met file to disk.
- get_daymet2_apsim_met: (requires the ‘daymetr’ package). Fetch data and create a ‘met’ R object and (optionally) write a met file to disk.
- get_gsod_apsim_met: (requires the ‘GSODR’ package). Fetch data and create a ‘met’ R object and (optionally) write a met file to disk.
- get_iem_apsim_met: Fetch data from Iowa Environmental Mesonet
- get_iemre_apsim_met: Fetch data from Iowa Environmental Mesonet Reanalysis
- get_worldmodeler_apsim_met: Fetch data from CSIRO Worldmodeler
- plot plotting method for objects of class ‘met’.
- summary summary method for objects of class ‘met’.

Note that some utilities were available in the ‘APSIM’ package (loadMet, prepareMet, checkMet, writeMetFile) for reading, preparing, checking and writing a met file. However, that package has been removed from CRAN.

## Obtaining soil data

The function get_isric_soil_profile will retrieve data from the ISRIC Soil Grid global dataset (https://www.isric.org/) and return an object of class soil_profile (see also apsimx_soil_profile). To derive some of the properties needed by APSIM pedotransfer functions from Saxton and Rawls (2006) were used. This is a work in progress and improvements and suggestions are welcome.

In the USA, the function get_ssurgo_soil_profile will retrieve data from the SSURGO database through the soilDB R pacakge and will always return a list with objects of class soil_profile. Internally, it uses the ssurgo2sp function, which can be used to create an APSIM soil profile in two steps. The first step would be to obtain soil data through the ‘FedData’ R package by using the function get_ssurgo or use the get_ssurgo_tables in apsimx. The function ssurgo2sp can be used for conversion from SSURGO csv files to an object of class soil_profile and apsimx_soil_profile for generating a soil profile that can be used in APSIM-X. Finally, the function edit_apsimx_replace_soil_profile will batch replace the soil profile created by apsimx_soil_profile in a designated ‘.apsimx’ file. Similarly, ‘edit_apsim_replace_soil_profile’ will batch replace the soil profile in a designated ‘.apsim’ (Classic) file. I will be working on a more concrete tutorial at some point.

In addition, there are is a function to compare soil profiles compare_apsim_soil_profile, which can be used to compare, numerically, one or more soil profiles and a plot method to visually compare this object.

# File Type (or File Format) Details

APSIM has traditionally generated files that produce simulations using an XML schema. This has been used with APSIM versions of 7.x, ‘Classic’. With APSIM-X a new format based on JSON files has been implemented and apparently both formats will be supported for the forseeable future. JSON files are less verbose and they are gaining widespread adoption. All distributed APSIM-X examples are ‘JSON’ now.

The apsimx package supports inspection and editing of both file types, but XML is for ‘Classic’ only and JSON is for APSIM-X. In most instances the parameters that are likely to need inspection and editing are supported, but more features will be added in the future as needed.

# Additional miscellaneous functions

apsim_version: displays which version(s) of APSIM(X) are available. For example,

    ava <- apsim_version()
    aiu <- apsim_version(which = "inuse")

edit_apsimx_batch: Uses APSIM-X built-in functionality to edit parameters. In testing, it is slower than the other ’edit_apsimx*’ functions.

doy2date: Utility function for converting from day of the year (1-366) to ‘Date’ and performing the inverse conversion.

compare_apsim: Utility function for comparing simulations or observed and simulated data.

unit_conv: Unit conversion utility

carbon_stocks: function to calcualte carbon stocks.

check_apsim_met: check an object of class ‘met’

check_apsimx_soil_profile: check an object of class ‘soil_profile’

# Appendix

Files in ‘inst/extdata’ and how they are used (ordered alphabetically):

- Ames.met: used to run the Soybean.apsimx.
- Factorial.apsimx: This file IS needed for the vignette.
- ISUAG (folder): SSURGO files to test the ssurgo2sp function.
- maize-factorial.apsim file used to test the ability to inspect and edit factorial .apsim files (see ‘inspect_apsim’).
- maize-manager-folder.apsimx: file used to test whether I need to modify inspect and edit functions when the management is inside a folder.
- maize-soybean-rotation.apsim: example file with a maize and soybean rotation used in testing and in the ‘inspect_apsim’ file.
- maize-swim.apsim: example file with the SWIM module for testing (test_apsim_swim.R).
- Maize.apsimx: This file is needed for the vignette.
- Maize.csv: This file is needed for the vignette.
- Maize.out/sum: This file is needed for the ‘read_apsim’ example.
- Maize75.xml: This file is used in ‘inspect_apsim_xml’ and optim vignette.
- MaizeSoybean.apsimx: This file is needed for the vignette and for testing in ‘test_replacements.R’
- Millet.apsim: Millet example from APSIM ‘Classic’ for testing ‘inspect_apsim’ and used in the vignette.
- Millet.out/sum: result from the Millet simulation. Used in the ‘read_apsim’ example.
- Soybean.apsimx: Soybean example for APSIM-X. Used in ‘test_replacements.R’.
- Wheat-opt-ex.apsimx: This file is used in the ‘optim-apsim’ vignette.
- wheat-sim-b4-opt.csv: This file is used in the ‘optim-apsim’ vignette.
- wheat-sim-opt.csv: This file is used in the ‘optim-apsim’ vignette.
- Wheat.apsimx: This file is used in the vignette.
- Wheat.csv: This file is used in the vignette.
- WheatRye.apsimx: This file is used in ‘test_replacements.R’.